Abstract:
Home gardening is identified as one of the remedial measures for food security issues
caused by the economic downfall in Sri Lanka. Home gardening contributes to
household food security by providing direct access to food. Further, it is also an
important source of supplementary income for households. The appropriate function
of a pressurized agriculture pipe network system is vital to supply a sufficient quantity
of water to the plants at sufficient pressure through the sprinkler output. Despite this,
very few computer simulation techniques studied for optimization for the case of the
home gardening agricultural pipe system. In this study, the WaterGEMS V8i software
simulator was used and hydraulic analyses were conducted to design an optimal
pressurized agriculture pipe network suitable for home gardening in the Vavuniya
area. The water flow rate at sprinkler outlet points for chilli and onion were considered
600 L/h and 325 L/h respectively. The total available land area for home gardening
was considered as 50 perches in this study. Fifteen models were developed for
different combinations of land use for chilli and onion cultivation. The hydraulic
parameters such as nodal pressure, flow velocity, flow rate and head requirement
were analyzed under steady-state simulation by using the Hazen-Williams friction
method. The proposed simulation model was calibrated and validated by using a
previous study. The result revealed that all of the nodes in the system are operating
above the threshold pressure limit of 2 bars. It was found that a combination of 20%
land (10 perches) for onion and 80% land (40 perches) for chilli required the highest
power pump capacity of 3.5 kW. The power of the water pump for chilli only and onion
only was positively correlated with the cultivated land extent and R2
values were
observed to be 0.9991, and 1.0 for chilli and onion respectively. The flow velocity in
all pipes was above the minimum level of 0.5 m/s eliminating silt deposition and below
the maximum level of 2.0 m/s avoiding the water hammer issues. The proposed
pressurized agriculture pipe network design shall be used for modelling of pipe
network for home gardening with different crop types by changing the model input
parameters by using the WaterGEMS V8i computer simulator.
