DSpace Repository

Adsorptive behavior of engineered biochar /hydrochar for tetracycline removal from synthetic wastewater

Show simple item record

dc.contributor.author Yanushiya, J.
dc.contributor.author Thusalini, A.
dc.contributor.author Kannan, N.
dc.date.accessioned 2024-02-19T03:10:27Z
dc.date.available 2024-02-19T03:10:27Z
dc.date.issued 2024
dc.identifier.citation Jeganathan, Y., Asharp, T., & Nadarajah, K. (2024). Adsorptive behavior of engineered biochar/hydrochar for tetracycline removal from synthetic wastewater. Environmental Pollution, 123452. en_US
dc.identifier.uri http://repo.lib.jfn.ac.lk/ujrr/handle/123456789/10115
dc.description.abstract In this research, engineered biochar and hydrochar derived from paddy husk were compared for the adsorption tetracycline (TC) in water effluents. Biochar was produced at three different pyrolysis temperatures (e.g., 250 °C, 300 °C and 350 °C) while hydrochar was produced using three different HTC temperatures (e.g., 180 °C, 200 °C and 220 °C). The adsorptive experiments were performed for both biochar and hydrochar using well-defined experimental conditions: pH (3); initial TC concentration (10 mg/L); adsorbent dosage (1 g/L); and temperature (27 °C) to study their adsorptive performances (qe in mg/g). After selecting the best qe values for both biochar and hydrochar, both materials were modified using 20% H3PO4. A comprehensive scientific evaluation of both engineered biochar (EBC 350) and hydrochar (EHC 220) was performed using adsorption isotherm, adsorption kinetics, rate-limiting, and thermodynamics tests along with their characterization using FTIR and point of zero charge (pzc). The effects of temperature, dosage, and initial TC concentration on the adsorption process were studied for both EBC 350 and EHC 220. Acid activation improved the adsorptive performance of EHC 220 almost four times (from 1.9 to 7.5 mg/g), whereas adsorptive performance of EBC 350 improved 2.4 times from 3.8 to 9.1 mg/g. The best pH for TC adsorption onto EHC 220 was 5, whereas it was 3 for EBC 350. EBC 350 exhibited a good fit with the Freundlich model, whereas EHC 220 followed the Langmuir model. At 100 mg/L TC concentration, EHC 220 exhibited higher qe value (46.9 mg/g) compared to EBC 350 (41.7 mg/g). The Pseudo-first order kinetic model was the best fit for EHC 220 adsorption, whereas Pseudo- second order model was most suitable for EBC 350. The adsorption mechanisms involved in TC adsorption by EHC 220 included hydrogen bonding, hydrophobic effect, and interaction, whereas cation exchange, mass diffusion, and interaction were involved for EBC 350. The results of this study will facilitate the development of cost-effective filters with the incorporation of engineered biochar/engineered hydrochar for the active removal of emerging contaminants, like tetracycline, from wastewater so as to increase its reusable potential. en_US
dc.language.iso en en_US
dc.publisher Elsevier en_US
dc.subject Engineered biochar en_US
dc.subject Engineered hydrochar en_US
dc.subject H (3) PO (4) en_US
dc.subject Isotherm en_US
dc.subject Kinetics en_US
dc.subject Paddy husk en_US
dc.subject Tetracycline en_US
dc.subject Thermodynamics en_US
dc.subject Wastewater irrigation en_US
dc.title Adsorptive behavior of engineered biochar /hydrochar for tetracycline removal from synthetic wastewater en_US
dc.type Article en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record