Please use this identifier to cite or link to this item: http://repo.lib.jfn.ac.lk/ujrr/handle/123456789/2969
Full metadata record
DC FieldValueLanguage
dc.contributor.authorJoy Mathavan, J.
dc.contributor.authorPatnaik, A.
dc.date.accessioned2021-06-08T08:57:37Z
dc.date.accessioned2022-06-28T10:10:45Z-
dc.date.available2021-06-08T08:57:37Z
dc.date.available2022-06-28T10:10:45Z-
dc.date.issued2016
dc.identifier.urihttp://repo.lib.jfn.ac.lk/ujrr/handle/123456789/2969-
dc.description.abstractApart from classical bearing materials, Aluminium alloys are used as bearing materials these days because of their superior quality. In this analysis, new Aluminium based bearing materials, with filler metals Si, Ni, and Cr are prepared by metal mould casting in burnout furnace machine, and tribological properties of these alloys with and without lubrication were tested. The experiments for wear with lubrication are conducted on multiple specimen tester and experiments without lubrication is conducted on Pin on disk tribometer. The disc material used was SAE 1050 steel. Wear tests were conducted at a sliding speed of 0.785 m/s and at a normal load of 20 N. Coefficient of friction values, temperature changes and wear of the specimens were plotted on graph according to the above mentioned working conditions. Hardness and weight losses of the specimens were calculated. The obtained results demonstrate how the friction and wear properties of these samples have changed with the % addition of Silicon, Chromium and Nickel to the base metal aluminium.en_US
dc.language.isoenen_US
dc.publisherIOP Conference Series: Materials Science and Engineering.en_US
dc.titleAnalysis of wear properties of aluminium based journal bearing alloys with and without lubrication.en_US
dc.typeArticleen_US
Appears in Collections:Engineering Technology

Files in This Item:
File Description SizeFormat 
Analysis of wear properties of aluminium based.pdf887.58 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.