Please use this identifier to cite or link to this item: http://repo.lib.jfn.ac.lk/ujrr/handle/123456789/2327
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBharathi, M. S. D.
dc.contributor.authorRaman, K. H. T.
dc.contributor.authorKumar, K. P.
dc.contributor.authorPrasanna, S.
dc.contributor.authorRao, G. M.
dc.contributor.authorBalasundaraprabhu, R.
dc.date.accessioned2021-04-11T09:37:02Z
dc.date.accessioned2022-07-07T05:03:15Z-
dc.date.available2021-04-11T09:37:02Z
dc.date.available2022-07-07T05:03:15Z-
dc.date.issued2019
dc.identifier.issn0925-3467
dc.identifier.urihttp://repo.lib.jfn.ac.lk/ujrr/handle/123456789/2327-
dc.description.abstractThere has been a considerable amount of work on the deposition of lithium cobalt oxide thin films on the metalized silicon substrate using room temperature deposition and post-deposition annealing at 700 oC. High-temperature annealing leads to tensile stress-induced cracking in the lithium cobalt oxide thin film. After film cracking, a considerable amount of tensile stress gets stored in the cathode material, that leads to further degradation during the charge-discharge process. The other issue with high-temperature annealing is, lithium desorption that leads to the reduction in the lithium content in the cathode materials. To address this issue, we have developed a deposition process at a lower temperature of 500oC. The substrate used in the process was aluminium and the reason for choosing aluminium was its widely used current collector property in lithium-ion battery fabrication process. The deposited films at 500oC showed predominantly (104) orientation, which is a favourable texture for high diffusivity of lithium. SEM micrographs showed columnar growth and different textures for the films which were deposited with different thicknesses. The Raman spectra showed single phase lithium cobalt oxide and high crystalline nature. To avoid temperature induced effects, magnetron efficiency was also monitored during 500oC substrate temperature. The ideal target to substrate distance was optimized as 6 cm and the sputtering magnetron efficiency was unchanged. The electrochemical performance was evaluated using chronopotentiometry technique and the capacity of the deposited lithium cobalt oxide film was 120 μAh/cm2. The performance of the cathode was stable even up to 80 cycles.en_US
dc.language.isoenen_US
dc.publisherUniversity of Jaffnaen_US
dc.titleLow Temperature Deposition of Lithium Cobalt Oxide for Stable Performance as the Cathode of Solid-State Thin Film Batteriesen_US
dc.typeArticleen_US
Appears in Collections:AMCEHA 2019

Files in This Item:
File Description SizeFormat 
Low Temperature Deposition of Lithium Cobalt Oxide for Stable.pdf581.08 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.