Please use this identifier to cite or link to this item: http://repo.lib.jfn.ac.lk/ujrr/handle/123456789/10089
Full metadata record
DC FieldValueLanguage
dc.contributor.authorJoy Mathavan, J.-
dc.contributor.authorHafiz Bin Hassan, M.-
dc.contributor.authorSamad Bin Mahmud, A.-
dc.date.accessioned2024-02-12T04:37:39Z-
dc.date.available2024-02-12T04:37:39Z-
dc.date.issued2022-
dc.identifier.urihttp://repo.lib.jfn.ac.lk/ujrr/handle/123456789/10089-
dc.description.abstractStack up materials which consists of fiber composite panel and aluminium / titanium alloys keep on replacing conventional materials in the aircraft industry. Though stack up materials have enhanced mechanical properties, machining of it is still being as a challenge. This paper compares the hole quality of the holes drilled by uncoated and tetrahedral amorphous carbon (Ta-C) coated tungsten carbide twist drills in terms of hole diameter error, circularity error and hole surface roughness. Drilling experiments were performed at a constant speed of 2600 rev/min and feed rate of 0.05 mm/rev. The stack material of Al7075-T6/CFRP which has a composite laminate thickness of 3.387 mm and Al7075-T6 thickness of 3.317 mm was used as workpiece and drilled under single shot process in dry condition. The results show that, uncoated drill produces better stack up diameter tolerance, circularity and Al7075-T6 surface finish, while Ta-C coated drill bits produce better CFRP surface finish.en_US
dc.language.isoenen_US
dc.publisherAIP Publishingen_US
dc.titleComparative study of hole quality performance in drilling of CFRP/Al7075-T6 stack using tetrahedral amorphous carbon coated drillen_US
dc.typeArticleen_US
dc.identifier.doihttps://doi.org/10.1063/5.0178378en_US
Appears in Collections:Engineering Technology

Files in This Item:
File Description SizeFormat 
070003_1_5.pdf517.42 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.